But model of razor blade of dislocation cutting tool and standard

1, its equivalent uses ISO5680 - 1989. It is applied to but lathe tool of the circle outside dislocation, end panel lathe tool, prevent form lathe tool and the model staff that spell the module knife head that holds compound cutting tool. Its model also is mix by a group of letters that arrange by compasses methodize composition of place of digital code name. 2. But model of milling cutter of dislocation belt aperture shows regulation it is in ISO7406 - of the formulate on the foundation of 1986. It is applied to but 3 dislocation face milling cutter, blade (groove) milling cutter, cover type to establish milling cutter to reach cylindrical the work out of milling cutter model. Its model by 11 date composition (face milling cutter has 10 number only, without the 11st date) . Before 1 ～ 4 a trait that demonstrates cutter hub. The date behind date of twists and turns state bit installs clip means and bit feature. 3. But model of milling cutter of dislocation belt handle shows regulation it is in international standard ISO7848 - of the formulate on the foundation of 1986. Its model also by 11 date composition. Have 5 number among them the trait that shows cutter hub, two date the trait that shows petiole, additionally 4 date the feature of the method holding clip that shows bit and length of its cutting blade. 4. But model of dislocation razor blade shows regular GB2076-87, equivalent ISO1832-85, the cutting that factory of domestic and international hard alloy produces is used but dislocation razor blade (include car razor blade and mill razor blade) model accords with this standard. It is by the letter that gives a sense and digital code name, 10 order that arrange by certain order composition. Among them the 8th with the 9th date state cutting blade is sectional respectively appearance and bit cutting direction, just grant below the circumstance of need only line out. 2, but standard of dislocation razor blade 1. GB2079 - 87 (replace GB2079 - 80) imperforate hard alloy but dislocation razor blade: This standard use international standard ISO0883 - 1995. TNUN, TNGN, TPUN, TPGN, SNUN, SNGN, SPUN, SPGN, TPUR, TPMR, SPUR, SPMR set in the standard in all the series dimension of 12 sort razor blade. 2. GB2077 - 87 (replace GB2077 - 80) hard alloy but radius of round horn of dislocation razor blade: This standard equivalent uses international standard ISO3286 - 1976. The measure series of ε of R of radius of round horn of standard regulation point of a knife is 0.

2, 0.

4, 0.

8, 1.

6, 2.

0, 2.

4, 3.

2mm. 3. GB2078 - 78 (replace GB2078 - 80) the hard alloy of the aperture that bring a circle but dislocation razor blade: This standard equivalent uses international standard ISO3364 - 1985. TNUM, TNMM, TNUG, TNMG, TNUA, TNMA, ENUM, FNMM, WNUM, SNUM, SNMM, SNUG, SNMG, SNUA, SNMA, CNUM, CNMM, CNUG, CNMG, CNUA, CNMA, DNUM, DNMM, DNUG set in the standard, DNMG. 4. GB2081 - 87 (replace GB2081 - 80) hard alloy but dislocation mill razor blade: This standard equivalent uses international standard ISO3365 - 1985. This standard set SNAN, SNCN, SNKN, SPAN, SPCN, SPKN, SECN, TPAN, TPCN, TPKN, TECN, FPCN, LPEX in all of 13 kinds of types but dimension of series of dislocation mill razor blade. 5. GB2080 - 87 (replace GB2080 - 80) heavy aperture hard alloy but dislocation razor blade: This standard equivalent uses ／ of international standard ISO6987 1 - 1993. TCMW, TCMT, WCMW, WCMT, SCMW, SCMT, CCMW, CCMT, DCMW, DCMT, RCMW, RCMT set in the standard in all the heavy aperture of 12 kinds of types hard alloy but dimension of series of dislocation razor blade. 3, but standard of dislocation milling cutter: 1. But dislocation establishs GB5340 of level of milling cutter state - 85: It is to consult ／ of international standard ISO6262 1 - 1982 with ISO6263 ／ 2 - of 1982 formulate. Have cut smooth model straight handle establishs milling cutter and Mohs awl handle to establish milling cutter two parts. 2. But dislocation GB5341 of level of state of 3 blade milling cutter - 85: It is to consult international standard ISO6986 - of 1983 formulate. 3. But GB5342 of level of state of dislocation face milling cutter - 85: It is to consult international standard ISO6462 - of 1983 formulate. 4. But dislocation helix establishs milling cutter: The standard set a diameter of straight handle of 32 ～ 100mm or awl handle establish milling cutter. Because its blade ministry is longer, what arrange by direction of edge corkscrewed yarn is multichip hard alloy but mutual crisscross builds dislocation razor blade to receive and be become, apply to thick mill. CNC Milling CNC Machining