Mill of face of much cutting blade brings new option

  • Time:
  • Click:423
  • source:EASCOR CNC Machining
Shanteweikekeleman provided a series of new-style and efficient milling cutting tool continuously for metallic cutting industry, coroMill 345 serves as the product of an innovation, bring new cutting tool option for mill of face of much cutting blade. CoroMill 345 uses advanced cutting tool concept, support the special treatment of high yield, it is small lot is mixed mix model the ideal cutting tool of treatment. When basically be being machined with Yu Gang and stainless steel smaller cut process of difficult high-powered face mill, coroMill 345 is had versatility and optimize possibility, the lens face finish machining that also applies to the rough machining working procedure with slashing requirement and razor blade of use Xiu Guangren accordingly. Through using additional pitch chooses plan fully (HX) lets more cutting tine participate in cutting, coroMill 345 can increase metallic purify capacity further. Regard new generation, mature 45 ° as planar milling cutter, coroMill 345 assembles the double-faced bit that every face has 4 cutting blade. Of coupling of posture of face of the knife before knife flap and razor blade important the island that prop up, can prop up cutting blade to the greastest extent so and be bit provide highest stability. When using small cutting deepness, bigger axial dip forms soft cutting action, the cutting force on such workpiece can generate low axial pressure. Become bigger when cutting deepness, the vertical section of cutting blade begins to participate in cutting, because this was bit to offer stronger structure, assured cutting security, when undertaking difficult cutting especially. CoroMill 345 provided the cutting tool that suits a large number of different type machine tools, from low power small machine tool arrives high power big machine tool, from ISO 30, 40 arrive with 50 machining center much task machine tool, applicable milling cutter diameter is 40~250mm. The one stride that milling cutter technology strides ahead makes the function of CoroMill 345 promotes a new standard, the low noise when treatment is best testimony. CoroMill 345 is had versatility and optimize possibility, the lens face finish machining that also applies to the rough machining working procedure with slashing requirement and razor blade of use Xiu Guangren accordingly. CNC Milling CNC Machining